> Simple to use and reliable
> Consistent and accurate applications
> Easy and secure programming
> Detailed management reports and GPS (option)

The CHLOROBITETM is a versatile and comprehensive closed-loop controller that is safe and simple to operate. Its high accuracy makes it possible to minimize material quantities and ensure effective spreading operations. Connected to an optional INFOBITETM GPS data logger, it automates the collection of detailed spreader activities using free-to-use wireless transmission.

Technical specifications

Weight & Dimensions (W X H X L) :

Display console

0.8 Kg (1 lb, 13 oz)
150 x 45 x 130 mm (6" x 1.75" x 5.13")

Switch Panel

0.5 Kg (1lb, 2 oz)
150 x 85 x 50 mm (6" x 3.25" x 2")

Power pack

1.1 Kg (2 lb, 6 oz)
240 x 90 x 160 mm (9.45" x 3.55" x 6.3")

Supply voltage

10 to 15 VDC, Load dump protected (Max 70VDC, < 100 ms and 1% duty cycle)

Operating temperature

-40C to +75C (-40F to +167F)

Storage Temperature

-40C to +105C (-40F to +221F)

PWM Signal Frequency

150 Hz

Maximum Current

5A per solenoid


2 or 3 (pre-wet) DIN 43650/ ISO 4400

Speed Sensor Types

J1708 ECM, pulse and magnetic signals

Spreader Sensor Type


Programming Interface

Serial RS-232 (DB9 3 pin)

GPS / AVL Interface

Complete event log protocol (optional)

Closed Loop

Spreading rate controlled by conveyor feedback and vehicle speed. Liquid rate controlled by flow-meter feedback.

Spreading Modes

kg / km, lbs / mile, g / m2, lbs / yd2

Liquid Modes

% of dry material


Wireless programming remote with security password

Conveyor Control

Minimum, Maximum, Steps. Rate table. Speed reference.

Spinner Control

MIN / MAX, Auto Stop / Continuous


Conveyor speed, spinner speed, momentary or continuous.

Manual override

Automatic on fault detection


Console and switches


Dimmable green VFD display (2 lines x 20 alphanumeric characters)


Maxed-out hydraulic, faulty speed or conveyor sensor. Over-speed buzzer


Detailed event-based reports Free data transfer and analysis software


INFOBITETM wireless GPS data logger

  • Pre-wet Liquid controls
  • Gate & material sensors
  • Pavement & ambient temperature probe
  • Driver ID buttons

2 Years (electronic components)